Fabia Mk1
| Summary of components: Heat exchanger, Heating element for additional air heating (PTC) -Z35- |
| 1 - | Bottom part of distributor housing |
| 2 - | Heating element for additional air heating (PTC) -Z35- |
| q | only fitted on certain models |
| q | when temperature button on control is turned to “warm” (microswitch) is regulated by the engine control unit and 2 relays in 3 speeds in line with ambient temperature, coolant temperature and alternator load. |
| q | Check relay for additional air heater heating element (PTC) -Z35- → Engine, Fuel Injection; Rep. Gr.01 |
| q | Check heating element for additional air heating (PTC) -Z35- → Current flow diagrams and Fitting locations |
| 3 - | Heat exchanger |
| q | with sticker for feed and return flow → Item |
| q | removing and installing → Chapter |
| q | check fitting position: |
| t | Sticker must point upwards |
| t | Pipe connections must be centred in the opening of the bottom part of distributor housing → Item-arrow- |
| 4 - | Sticker on heat exchanger for feed/return flow |
| q | feed on left in direction of travel, return flow on right |
| 5 - | Gasket with holder |
| 6 - | Gasket in assembly plate |
| 7 - | Sealing rings |
| q | replace |
| 8 - | Connection fitting for heat exchanger |
| q | different versions possible |
| 9 - | 20 Nm |
