skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Disassembling and assembling the gearbox > < Tightening torques

Fabia Mk1

Inspecting gear oil
Inspecting gear oil
Special tools and workshop equipment required
t  Socket wrench insert -T30023 (3357)-
Gearbox oil specification → Electronic Catalogue of Original Parts.
   
–  Unscrew plug for inspecting gear oil -arrow-.
The oil is at the correct level if the gear is filled up to the lower edge of the oil filler hole.
–  Screw in the screw of the filler hole -arrow- and tighten to tightening torque → Fig..
If re-filling, do the following:
–  Unscrew plug -arrow-.
–  Pour in gear oil up to lower edge of filler hole.
–  Screw in plug -arrow-.
–  Start engine, engage a gear and allow gearbox to rotate for about 2 minutes.
–  Switch off engine, unscrew plug -arrow- and again top up gear oil to lower edge of filler hole.
–  Screw in the screw of the filler hole -arrow- and tighten to tightening torque → Fig..
  S34-0345
Different versions of oil filler plug and oil drain plug.
I - Oil filler plug or oil drain plug with internal serration 24 Nm
lI - Oil filler plug or oil drain plug with internal serration 32 Nm
  Note
t  Loosen or tighten oil filler plug or oil drain plug with internal serration socket wrench insert -T30023 (3357)-
t  Assign oil filler plug and oil drain plug via → Electronic Catalogue of Original Parts.
  N34-10041

Disassembling and assembling the gearbox > < Tightening torques