Fabia Mk1
Coolant regulator - Summary of components (for engines with identification characters AUA, BBY, BKY, AUB, BBZ) |
1 - | Spring strap clamp |
2 - | Self-tapping screw, 9 Nm |
3 - | from bottom of radiator |
4 - | Connection fittings |
5 - | O-ring |
q | replace |
6 - | Coolant regulator |
q | check: heat up regulator in a water bath |
q | Start of opening approx. 84 °C |
q | End of opening: approx. 98 °C |
q | Opening stroke: at least 7 mm |
7 - | To the compensation bottle above |
8 - | To heat exchanger of heating system |
9 - | From compensation bottle |
10 - | Retaining clip |
11 - | From heat exchanger of heating system |
12 - | Cooling pump housing at cylinder block |
13 - | Sealing ring |
q | replace |
14 - | Coolant pipe |
15 - | Coolant regulator housing |
16 - | 10 Nm |
17 - | Screw cap |
q | or connection for ATF radiator |
18 - | Coolant temperature sender -G62- |
19 - | Towards top radiator |