skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Disassembling and assembling intake manifold > < Rules of cleanliness
Overview of fitting locations
   
Overview of fitting locations
Components A through H are not represented in the overview figure.
A - Diesel direct injection system relay - J322-
q   on relay carrier → Fig.
B - Glow plug relay -J52-
q   only on engine with identification characters ASZ, it is located on the relay carrier → Fig.
C - Low heat output relay -J359-
q   on relay carrier → Fig.
D - High heat output relay -J360-
q   on relay carrier → Fig.
E - Fuel pump relay -J17-
q   on relay carrier → Fig.
F - Sender for accelerator pedal position -G79-
q   in footwell on the accelerator pedal → Fig.
G - Brake light switch -F- and Brake pedal switch -F47-
q   in footwell on the brake pedal → Fig.
H - Clutch pedal switch -F36-
q   in footwell on the clutch pedal → Fig.
I - Automatic glow period control unit -J179-
q   only on engine with identification characters BLT, it is located in the battery carrier
J - Radiator fan run-on relay -J397-
q   only on engine with identification characters BLT, it is located on the relay carrier → Fig.
1 - Valve block
q   Component parts of the valve block are:
q   Exhaust gas recirculation valve -N18-
q   Solenoid valve for charge pressure control -N75-
q   Only on engine with identification characters ASZ: Change-over valve for intake manifold flap -N239-
2 - For engine with identification characters ASZ: Mechanical exhaust gas recirculation valve
q   On engine with identification characters BLT: Intake manifold flap motor -V157- and mechanical exhaust gas recirculation valve
3 - Sender for the coolant temperature -G62-
4 - Air mass meter -G70-
5 - Engine control unit -J248-
6 - Fuel temperature sender -G81-
7 - Connector
q   3-pin, grey
q   for engine speed sender -G28-
q   3-pin, black
q   for the camshaft position sensor -G40-
8 - Engine speed sender -G28-
9 - Camshaft position sensor -G40-
10 - Intake manifold pressure sender -G71- with intake manifold temperature sender -G72-
11 - Fuel filter
q   repairing → 1.9/96 TDI Engine, Mechanics; Rep. Gr. 20

   
Components in footwell
1 - Clutch pedal switch -F36-
2 - Brake light switch -F- and Brake pedal switch -F47-
3 - Sender for accelerator pedal position -G79-
  S24-0374
Relay carrier
3 - Glow plug relay -J52- (on engine with identification characters ASZ)
4 - Fuel pump relay -J17-
5 - Radiator fan run-on relay -J397- (on engine with identification characters BLT)
8 - Low heat output relay -J359-
9 - High heat output relay -J360-
15 - Diesel direct injection system relay - J322-
  S97-1373

Disassembling and assembling intake manifold > < Rules of cleanliness