skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing defroster flap control motorV107 and temperature flap control motor V68 > < Removing and installing the control motor of air flow flapV71

Fabia Mk2

Removing and installing the control motor of central flapV70
Removing and installing the control motor of central flap -V70-
Removing
–  Removing the dash panel → Body Work; Rep. gr.70.
–  Right-hand drive - remove air conditioning unit → Chapter.
   
–  Press the catch -2- and swivel control motor with holder to the right until the levers no longer engage in the guiding grooves.
–  Pull control motor with holder out of the attachments -3-.
–  Unplug connector -1-.
Install
–  Mount plug -1-.
  S87-0271
–  Put holder with control motor into the attachments -5-.
–  Insert lever -1- into the guiding groove -2- and lever -3- into the guiding groove -4- of the control motor.
  S87-0270
–  Lock holder with control motor in the distributor housing -2- into position.
–  Check lever position in the guiding grooves of the control motor.
  Note
If the control motor was replaced, perform a basic setting → Vehicle diagnostic, testing and information system VAS 5051.
  S87-0271

Removing and installing defroster flap control motorV107 and temperature flap control motor V68 > < Removing and installing the control motor of air flow flapV71