Octavia Mk1
| Removing and installing ignition system |
| 1 - | Ignition lead |
| q | 4…8 kΩ |
| q | with shielded plug and spark-plug |
| q | Use extractor -T10112- to unplug spark plug connector. |
| 2 - | Ignition transformer -N, N128- |
| q | with identification for ignition leads: |
| A = Cylinder 1 |
| B = Cylinder 2 |
| C = Cylinder 3 |
| D = Cylinder 4 |
| q | with power output stage -N122- |
| q | resistances → Chapter |
| 3 - | 10 Nm |
| 4 - | Connector |
| q | 4-pin |
| 5 - | Knock sensor -G61- |
| q | contacts of sender and of connector gold-plated |
| 6 - | 3-pin plug connection |
| q | contacts gold-plated |
| q | black |
| 7 - | 20 Nm |
| q | The tightening torque influences the knock sensor function |
| 8 - | Spark plug, 20...30 Nm |
| q | Type and electrode gap → Inspection and Maintenance |
| q | use spark plug wrench, (e.g. -3122 B-) for removing and installing |
| 9 - | Connector |
| q | for engines with engine code AVU |
| q | for the camshaft position sensor -G163- |
| q | contacts of sender and of connector gold-plated |
| q | 3-pin |
| 10 - | Support |
| q | for engines with engine code AVU |
| q | for camshaft position sensor -G163- |
| 11 - | Camshaft position sensor -G163- |
| q | for engines with engine code AVU |
| q | check → Chapter |
| 12 - | Camshaft sprocket |
| q | for engines with engine code letters AVU with trim for hall sender |
| q | removing and installing → 1.6 l/75 kW Engine, Mechanical Components; Rep. Gr.15 |
| 13 - | 10 Nm |
| q | for engines with engine code AVU |
| 14 - | 100 Nm |
| q | to release and tighten use counterholder -3415- |
| 15 - | 10 Nm |
| q | for engines with engine code BFQ |
| 16 - | Camshaft position sensor -G163- |
| q | for engines with engine code BFQ |
| q | check → Chapter |
| 17 - | Gasket ring |
| q | for engines with engine code BFQ |
| q | replace if damaged |
| q | before fitting moisten with clean engine oil |
| 18 - | Rotor |
| q | for engines with engine code BFQ |
| q | on the camshaft |
