Octavia Mk2
Summary of components - Disassembling and assembling „Haldex coupling of the 4th generation“ (final drive „OBR“) |
1 - | O-ring |
q | moisten with high efficiency oil for Haldex coupling and insert |
q | always replace → Electronic Catalogue of Original Parts |
2 - | housing for Haldex coupling |
q | removing and installing complete Haldex coupling → Chapter |
3 - | Four-wheel drive control unit -J492 - |
q | with control valve of opening degree of coupling -N373- |
q | removing and installing → Chapter |
4 - | 6 Nm |
5 - | Gasket ring for flange of propshaft |
q | removing and installing → Chapter |
6 - | Flange for propshaft |
q | removing and installing → Chapter |
7 - | Snap nut, 210 Nm |
q | secure with locking agent -D 000 600- |
8 - | 50 Nm |
q | 4 pieces |
q | for housing of Haldex coupling Pos. 2 to rear final drive |
9 - | Cover |
q | for oil filter housing |
q | Oil filter change is not necessary |
10 - | Cover |
q | for pressure reservoir |
WARNING
|
11 - | O-ring |
q | 2 pieces |
q | Diameter 34 mm |
q | for pump for Haldex coupling -V181- |
q | moisten with high efficiency oil for Haldex coupling and insert |
q | always replace → Electronic Catalogue of Original Parts |
12 - | Pump for Haldex coupling -V181- |
q | removing and installing → Chapter |
13 - | 6 Nm |