skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing top trim panel of pillar B (vehicles without head airbag) > < Removing and installing top trim panel of pillar A (vehicles with head airbag)

Octavia Mk2

Removing and installing bottom trim panel of pillar A
Removing and installing bottom trim panel of pillar A
Removing:
–  Remove bottom trim panel of pillar B → Chapter.
–  Remove engine bonnet release lever → Chapter (only on driver's side).
   
–  Remove screw -2- (1.5 Nm) - only on driver's side).
–  Pull off bottom trim panel (Pos. 1).
Installing:
–  Installation is carried out in the reverse order; pay attention to the following points:
–  Recondition the clips (Pos. 3) in the bottom trim panel of pillar A (Pos. 1), if necessary replace with new ones.
  S70-0304

Removing and installing top trim panel of pillar B (vehicles without head airbag) > < Removing and installing top trim panel of pillar A (vehicles with head airbag)