–
| Tighten adjusting nut -arrow- until both wheels are hard to turn by hand. |
Note The adjusting nut must be screwed over the end of the tension rod (self-locking effect). |
–
| Release hand-brake and check whether both wheels rotate freely, if necessary release adjusting nut slightly. |
–
| Put the hand-brake lever into the 4th catch position (after being in the release position). |
| No wheel should be rotatable; tighten the adjusting nut if necessary. |
–
| Release hand-brake and check whether both wheels rotate freely, if necessary release adjusting nut slightly. |
–
| Put the hand-brake lever into the 1st catch position and release the hand-brake. |
| The hand-brake must automatically return into the release position below the 1st catch. |
|
|
|